[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.39-gta022-gta02 (Debian 2.6.39-1gta022) (timo.lindfors@iki.fi) (gcc version 4.4.6 (Debian 4.4.6-11) ) #1 Tue Nov 15 10:34:48 UTC 2011 [ 0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: GTA02 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] BUG: mapping for 0x19000000 at 0xe0000000 overlaps vmalloc space [ 0.000000] CPU S3C2442B (id 0x32440aab) [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics [ 0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz [ 0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c045e2e0, node_mem_map c04c5000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00820000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f680000(rootfs) g_ether.dev_addr=00:1F:11:01:97:73 g_ether.host_addr=00:1F:11:01:97:74 root=/dev/mmcblk0p2 rootdelay=1 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] allocated 524288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 124516k/124516k available, 6556k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xc8800000 - 0xf6000000 ( 728 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc002b000 ( 140 kB) [ 0.000000] .text : 0xc002b000 - 0xc04334d4 (4130 kB) [ 0.000000] .data : 0xc0434000 - 0xc045f458 ( 174 kB) [ 0.000000] NR_IRQS:85 nr_irqs:85 85 [ 0.000000] irq: clearing pending ext status 000912f0 [ 0.000000] irq: clearing pending ext status 000902d0 [ 0.000000] irq: clearing subpending status 00000180 [ 0.000000] irq: clearing subpending status 00000080 [ 0.000000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttySAC2] enabled [ 0.000000] Calibrating delay loop... 199.47 BogoMIPS (lpj=498688) [ 0.040000] pid_max: default: 32768 minimum: 301 [ 0.040000] Security Framework initialized [ 0.040000] Mount-cache hash table entries: 512 [ 0.040000] Initializing cgroup subsys ns [ 0.040000] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.040000] Initializing cgroup subsys cpuacct [ 0.040000] Initializing cgroup subsys memory [ 0.040000] Initializing cgroup subsys devices [ 0.040000] Initializing cgroup subsys freezer [ 0.040000] Initializing cgroup subsys net_cls [ 0.040000] Initializing cgroup subsys blkio [ 0.040000] CPU: Testing write buffer coherency: ok [ 0.045000] devtmpfs: initialized [ 0.050000] print_constraints: dummy: [ 0.050000] NET: Registered protocol family 16 [ 0.055000] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.060000] S3C2442: Initialising architecture [ 0.060000] S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics [ 0.060000] DMA channel 0 at c8808000, irq 33 [ 0.060000] DMA channel 1 at c8808040, irq 34 [ 0.060000] DMA channel 2 at c8808080, irq 35 [ 0.060000] DMA channel 3 at c88080c0, irq 36 [ 0.060000] S3C244X: Clock Support, DVS off [ 0.065000] s3c-adc s3c24xx-adc: attached adc driver [ 0.065000] s3c24xx-pwm s3c24xx-pwm.0: tin at 25000000, tdiv at 25000000, tin=divclk, base 0 [ 0.065000] s3c24xx-pwm s3c24xx-pwm.1: tin at 25000000, tdiv at 25000000, tin=divclk, base 8 [ 0.065000] s3c24xx-pwm s3c24xx-pwm.2: tin at 8333333, tdiv at 8333333, tin=divclk, base 12 [ 0.065000] s3c24xx-pwm s3c24xx-pwm.3: tin at 8333333, tdiv at 8333333, tin=divclk, base 16 [ 0.070000] bio: create slab at 0 [ 0.075000] s3c-i2c s3c2440-i2c: slave address 0x10 [ 0.075000] s3c-i2c s3c2440-i2c: bus frequency set to 97 KHz [ 0.085000] pcf50633 0-0073: Probed device version 19 variant 132 [ 0.115000] wake enabled for irq 53 [ 0.140000] print_constraints: auto: 3300 mV normal [ 0.140000] print_constraints: down1: 1300 <--> 1600 mV at 1300 mV normal [ 0.150000] print_constraints: down2: 1800 mV normal [ 0.150000] print_constraints: ldo1: 3300 mV normal [ 0.150000] print_constraints: ldo2: 3300 mV normal [ 0.155000] print_constraints: ldo3: 3000 mV normal [ 0.155000] print_constraints: ldo4: 3200 mV normal [ 0.155000] print_constraints: ldo5: 3000 mV normal [ 0.155000] print_constraints: ldo6: 3000 mV normal [ 0.160000] print_constraints: hcldo: 2000 <--> 3300 mV at 3000 mV normal [ 0.160000] print_constraints: memldo: 1800 mV normal [ 0.165000] s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter [ 0.235000] NET: Registered protocol family 2 [ 0.235000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.235000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.235000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.235000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.235000] TCP reno registered [ 0.235000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.235000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.240000] NET: Registered protocol family 1 [ 0.240000] gta02-pm-bt gta02-pm-bt.0: Openmoko Freerunner Bluetooth Power Management: starting [ 0.240000] gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 1 [ 0.260000] gta02-pm-gps gta02-pm-gps.0: starting [ 0.260000] gta02-pm-wlan gta02-pm-wlan.0: starting [ 0.465000] audit: initializing netlink socket (disabled) [ 0.465000] type=2000 audit(0.465:1): initialized [ 0.700000] VFS: Disk quotas dquot_6.5.2 [ 0.700000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.700000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.705000] msgmni has been set to 243 [ 0.710000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.710000] io scheduler noop registered [ 0.710000] io scheduler deadline registered [ 0.710000] io scheduler cfq registered (default) [ 0.720000] print_constraints: GSM: 3700 mV normal [ 0.740000] print_constraints: USBHOST: 3700 mV normal [ 0.750000] s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440 [ 0.750000] s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440 [ 0.750000] s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440 [ 0.780000] brd: module loaded [ 0.780000] neo1973-resume neo1973-resume.0: starting [ 0.820000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc. [ 0.820000] glamo-fb glamo-fb.0: spin_lock_init [ 0.890000] Console: switching to colour frame buffer device 60x40 [ 0.950000] fb0: SMedia Glamo frame buffer device [ 0.955000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz [ 0.960000] physmap platform flash device: 00200000 at 18000000 [ 0.960000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000020 Chip ID 0x008813 [ 0.960000] Intel/Sharp Extended Query Table at 0x0039 [ 0.960000] Intel/Sharp Extended Query Table at 0x0039 [ 0.960000] Intel/Sharp Extended Query Table at 0x0039 [ 0.960000] Intel/Sharp Extended Query Table at 0x0039 [ 0.960000] Intel/Sharp Extended Query Table at 0x0039 [ 0.960000] cfi_cmdset_0001: Erase suspend on write enabled [ 0.960000] erase region 0: offset=0x0,size=0x2000,blocks=8 [ 0.960000] erase region 1: offset=0x10000,size=0x10000,blocks=31 [ 0.960000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB [ 0.960000] RedBoot partition parsing not available [ 0.965000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics [ 0.965000] s3c24xx-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns [ 0.965000] s3c24xx-nand s3c2440-nand: NAND soft ECC [ 0.965000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit) [ 0.965000] 6 cmdlinepart partitions found on MTD device neo1973-nand [ 0.965000] Creating 6 MTD partitions on "neo1973-nand": [ 0.965000] 0x000000000000-0x000000040000 : "qi" [ 0.970000] 0x000000040000-0x000000080000 : "depr-ub-env" [ 0.975000] 0x000000080000-0x0000008a0000 : "kernel" [ 0.980000] 0x0000008a0000-0x000000940000 : "depr" [ 0.985000] 0x000000940000-0x000000980000 : "identity-ext2" [ 0.990000] 0x000000980000-0x000010000000 : "rootfs" [ 1.215000] mousedev: PS/2 mouse device common for all mice [ 1.215000] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.220000] samsung-ts s3c2440-ts: driver attached, registering input device [ 1.220000] input: S3C24XX TouchScreen as /devices/virtual/input/input1 [ 1.220000] input: PCF50633 PMU events as /devices/virtual/input/input2 [ 1.235000] pcf50633-rtc pcf50633-rtc: rtc core: registered pcf50633-rtc as rtc0 [ 1.235000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics [ 1.235000] i2c /dev entries driver [ 1.370000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics [ 1.375000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled [ 1.375000] cpuidle: using governor ladder [ 1.380000] s3c-sdi s3c2440-sdi: powered down. [ 1.380000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [ 1.380000] s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ [ 1.380000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc [ 1.385000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. [ 1.385000] Registered led device: gta02:red:aux [ 1.385000] Registered led device: gta02:orange:power [ 1.385000] Registered led device: gta02:blue:power [ 1.390000] Registered led device: gta02::vibrator [ 1.390000] TCP cubic registered [ 1.395000] NET: Registered protocol family 17 [ 1.395000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 1.395000] Registering the dns_resolver key type [ 1.400000] registered taskstats version 1 [ 1.405000] regulator_init_complete: memldo: disabling [ 1.410000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 1.410000] regulator_init_complete: hcldo: disabling [ 1.410000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 1.415000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 1.425000] pcf50633-rtc pcf50633-rtc: setting system clock to 2011-11-15 14:51:50 UTC (1321368710) [ 1.425000] Initializing network drop monitor service [ 1.425000] Waiting 1sec before mounting root device... [ 1.430000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 1.430000] mmc0: queuing unknown CIS tuple 0x01 (3 bytes) [ 1.440000] mmc0: queuing unknown CIS tuple 0x1a (5 bytes) [ 1.445000] mmc0: queuing unknown CIS tuple 0x1b (8 bytes) [ 1.445000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz). [ 1.445000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz). [ 1.445000] mmc0: queuing unknown CIS tuple 0x80 (1 bytes) [ 1.445000] mmc0: queuing unknown CIS tuple 0x81 (1 bytes) [ 1.445000] mmc0: queuing unknown CIS tuple 0x82 (1 bytes) [ 1.445000] mmc0: new SDIO card at address 0001 [ 1.465000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 0kHz div=0 (req: 0kHz). Bus width=0 [ 1.485000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 1.505000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 1.510000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 1.530000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 1.535000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 1.540000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 1.725000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 1.735000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 1.740000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 17000kHz). Bus width=0 [ 1.745000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 17000kHz). Bus width=2 [ 1.745000] mmc1: new high speed SDHC card at address b368 [ 1.750000] mmcblk0: mmc1:b368 USD 7.46 GiB [ 1.750000] mmcblk0: detected capacity change from 0 to 8018460672 [ 1.755000] mmcblk0: p1 p2 p3 p4 [ 2.440000] EXT3-fs: barriers not enabled [ 2.440000] kjournald starting. Commit interval 5 seconds [ 2.440000] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode [ 2.440000] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 2.450000] devtmpfs: mounted [ 2.450000] Freeing init memory: 140K [ 4.395000] pcf50633 0-0073: usb curlim to 1000 mA [ 5.405000] udevd[99]: starting version 172 [ 9.270000] usbcore: registered new interface driver usbfs [ 9.270000] usbcore: registered new interface driver hub [ 9.275000] usbcore: registered new device driver usb [ 10.040000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 10.090000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI [ 10.090000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 [ 10.090000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 [ 10.170000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 10.170000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.170000] usb usb1: Product: S3C24XX OHCI [ 10.170000] usb usb1: Manufacturer: Linux 2.6.39-gta022-gta02 ohci_hcd [ 10.170000] usb usb1: SerialNumber: s3c24xx [ 10.195000] hub 1-0:1.0: USB hub found [ 10.195000] hub 1-0:1.0: 2 ports detected [ 10.220000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes [ 10.565000] usb 1-1: new full speed USB device number 2 using s3c2410-ohci [ 10.810000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 [ 10.810000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 11.360000] HIFInit [ 14.915000] Bluetooth: Core ver 2.16 [ 14.915000] NET: Registered protocol family 31 [ 14.915000] Bluetooth: HCI device and connection manager initialized [ 14.915000] Bluetooth: HCI socket layer initialized [ 14.915000] Bluetooth: L2CAP socket layer initialized [ 14.915000] Bluetooth: SCO socket layer initialized [ 15.020000] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 15.035000] usbcore: registered new interface driver btusb [ 16.980000] EXT3-fs (mmcblk0p2): using internal journal [ 21.365000] g_ether gadget: usb0: Features changed: 0x00004800 -> 0x00004000 [ 21.365000] usb0: MAC 00:1f:11:01:97:73 [ 21.365000] usb0: HOST MAC 00:1f:11:01:97:74 [ 21.365000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 21.365000] g_ether gadget: g_ether ready [ 21.380000] udevd[209]: renamed network interface usb0 to usb [ 21.835000] asoc: wm8753-hifi <-> s3c24xx-iis mapping ok [ 21.860000] asoc: wm8753-voice <-> dfbmcs320-pcm mapping ok [ 21.885000] input: neo1973gta02 Headset Jack as /devices/platform/soc-audio/sound/card0/input3 [ 22.020000] g_ether gadget: full speed config #1: CDC Ethernet (ECM) [ 22.320000] tun: Universal TUN/TAP device driver, 1.6 [ 22.320000] tun: (C) 1999-2004 Max Krasnyansky [ 22.720000] usbcore: registered new interface driver usbserial [ 22.720000] USB Serial support registered for generic [ 22.720000] usbcore: registered new interface driver usbserial_generic [ 22.720000] usbserial: USB Serial Driver core [ 23.570000] USB Serial support registered for GSM modem (1-port) [ 23.570000] usbcore: registered new interface driver option [ 23.570000] option: v0.7.2:USB Driver for GSM modems [ 23.860000] Adding 65532k swap on /SWAP. Priority:-1 extents:17 across:65600k SS [ 24.695000] fuse init (API version 7.16) [ 25.030000] pcf50633 0-0073: usb curlim to 500 mA [ 31.465000] wd_keepalive (692): /proc/692/oom_adj is deprecated, please use /proc/692/oom_score_adj instead. [ 63.030000] gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 0 [ 63.040000] usb 1-1: USB disconnect, device number 2 [ 63.130000] mmc0: card 0001 removed [ 63.135000] s3c-sdi s3c2440-sdi: powered down. [ 347.600000] mapped channel 10 to 2