[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 7 21:35:22 UTC 2011 [ 0.000000] Command line: initrd=/live/initrd.img boot=live config quiet BOOT_IMAGE=/live/vmlinuz [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000de556000 (usable) [ 0.000000] BIOS-e820: 00000000de556000 - 00000000de756000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000de756000 - 00000000dfd3f000 (usable) [ 0.000000] BIOS-e820: 00000000dfd3f000 - 00000000dfdbf000 (reserved) [ 0.000000] BIOS-e820: 00000000dfdbf000 - 00000000dfebf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfebf000 - 00000000dfef7000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef7000 - 00000000dff00000 (usable) [ 0.000000] BIOS-e820: 00000000dff00000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f7000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000190000000 (usable) [ 0.000000] BIOS-e820: 0000000190000000 - 00000001a0000000 (reserved) [ 0.000000] DMI 2.6 present. [ 0.000000] last_pfn = 0x190000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 base 0000FFE00000 mask FFFFFFE00000 write-protect [ 0.000000] 4 base 000100000000 mask FFFF80000000 write-back [ 0.000000] 5 base 000180000000 mask FFFFF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 00000001a0000000 aka 6656M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xdff00 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000dff00000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dff00000 page 4k [ 0.000000] kernel direct mapping tables up to dff00000 @ 8000-b000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000190000000 [ 0.000000] 0100000000 - 0180000000 page 1G [ 0.000000] 0180000000 - 0190000000 page 2M [ 0.000000] kernel direct mapping tables up to 190000000 @ a000-c000 [ 0.000000] RAMDISK: 7f587000 - 7fffec3e [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 00000000dfef6120 0005C (v01 ACRSYS ACRPRDCT 00000003 01000013) [ 0.000000] ACPI: FACP 00000000dfef5000 000F4 (v04 ACRSYS ACRPRDCT 00000003 1025 01000013) [ 0.000000] ACPI: DSDT 00000000dfee6000 0B9EF (v01 ACRSYS ACRPRDCT F0000000 1025 01000013) [ 0.000000] ACPI: FACS 00000000dfe99000 00040 [ 0.000000] ACPI: HPET 00000000dfef4000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: APIC 00000000dfef3000 00084 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: MCFG 00000000dfef2000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: BOOT 00000000dfee5000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SLIC 00000000dfee4000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SSDT 00000000dfee3000 00386 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000190000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000190000000 [ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff] [ 0.000000] bootmap [0000000000013000 - 0000000000044fff] pages 32 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0190000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000168a454] TEXT DATA BSS ==> [0001000000 - 000168a454] [ 0.000000] #3 [007f587000 - 007fffec3e] RAMDISK ==> [007f587000 - 007fffec3e] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [000168b000 - 000168b1f7] BRK ==> [000168b000 - 000168b1f7] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff880001800000-ffff8800069fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00190000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000de556 [ 0.000000] 0: 0x000de756 -> 0x000dfd3f [ 0.000000] 0: 0x000dfef7 -> 0x000dff00 [ 0.000000] 0: 0x00100000 -> 0x00190000 [ 0.000000] On node 0 totalpages: 1506023 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3841 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 897920 pages, LIFO batch:31 [ 0.000000] Normal zone: 8064 pages used for memmap [ 0.000000] Normal zone: 581760 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000de556000 - 00000000de756000 [ 0.000000] PM: Registered nosave memory: 00000000dfd3f000 - 00000000dfdbf000 [ 0.000000] PM: Registered nosave memory: 00000000dfdbf000 - 00000000dfebf000 [ 0.000000] PM: Registered nosave memory: 00000000dfebf000 - 00000000dfef7000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f7000000 [ 0.000000] PM: Registered nosave memory: 00000000f7000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:17000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880006c00000 s90328 r8192 d24360 u524288 [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1483521 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: initrd=/live/initrd.img boot=live config quiet BOOT_IMAGE=/live/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ a00000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 5856256k/6553600k available (3080k kernel code, 529508k absent, 167836k reserved, 1891k data, 592k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2194.610 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.21 BogoMIPS (lpj=8778428) [ 0.008023] Security Framework initialized [ 0.008028] SELinux: Disabled at boot. [ 0.012584] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.016184] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.017869] Mount-cache hash table entries: 256 [ 0.018001] Initializing cgroup subsys ns [ 0.018004] Initializing cgroup subsys cpuacct [ 0.018008] Initializing cgroup subsys devices [ 0.018010] Initializing cgroup subsys freezer [ 0.018012] Initializing cgroup subsys net_cls [ 0.018032] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.018034] CPU: L2 Cache: 512K (64 bytes/line) [ 0.018036] CPU 0/0x0 -> Node 0 [ 0.018039] tseg: 00dff00000 [ 0.018040] CPU: Physical Processor ID: 0 [ 0.018042] CPU: Processor Core ID: 0 [ 0.018044] mce: CPU supports 6 MCE banks [ 0.018053] using C1E aware idle routine [ 0.018054] Performance Events: AMD PMU driver. [ 0.018059] ... version: 0 [ 0.018060] ... bit width: 48 [ 0.018061] ... generic registers: 4 [ 0.018063] ... value mask: 0000ffffffffffff [ 0.018064] ... max period: 00007fffffffffff [ 0.018066] ... fixed-purpose events: 0 [ 0.018067] ... event mask: 000000000000000f [ 0.018781] ACPI: Core revision 20090903 [ 0.032065] Setting APIC routing to flat [ 0.032357] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072714] CPU0: AMD Athlon(tm) II P340 Dual-Core Processor stepping 03 [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.012000] Initializing CPU#1 [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012000] CPU 1/0x1 -> Node 0 [ 0.012000] CPU: Physical Processor ID: 0 [ 0.012000] CPU: Processor Core ID: 1 [ 0.160035] CPU1: AMD Athlon(tm) II P340 Dual-Core Processor stepping 03 [ 0.160077] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164013] Brought up 2 CPUs [ 0.164015] Total of 2 processors activated (8778.26 BogoMIPS). [ 0.164018] System has AMD C1E enabled [ 0.164049] Switch to broadcast mode on CPU1 [ 0.164217] CPU0 attaching sched-domain: [ 0.164220] domain 0: span 0-1 level MC [ 0.164222] groups: 0 1 [ 0.164227] CPU1 attaching sched-domain: [ 0.164229] domain 0: span 0-1 level MC [ 0.164231] groups: 1 0 [ 0.164295] Switch to broadcast mode on CPU0 [ 0.164295] devtmpfs: initialized [ 0.166951] regulator: core version 0.5 [ 0.166951] NET: Registered protocol family 16 [ 0.166951] node 0 link 0: io port [0, ffffff] [ 0.166951] TOM: 00000000e0000000 aka 3584M [ 0.166951] Fam 10h mmconf [f7000000, f7ffffff] [ 0.166951] node 0 link 0: mmio [a0000, bffff] [ 0.166951] node 0 link 0: mmio [e0000000, efffffff] [ 0.166951] node 0 link 0: mmio [f0000000, f20fffff] [ 0.166951] node 0 link 0: mmio [f2100000, f22fffff] [ 0.166951] node 0 link 0: mmio [f2300000, f6ffffff] [ 0.166951] node 0 link 0: mmio [f7000000, f7ffffff] ==> none [ 0.166951] node 0 link 0: mmio [f8000000, ffdfffff] [ 0.166951] TOM2: 00000001a0000000 aka 6656M [ 0.166951] bus: [00,1f] on node 0 link 0 [ 0.166951] bus: 00 index 0 io port: [0, ffff] [ 0.166951] bus: 00 index 1 mmio: [a0000, bffff] [ 0.166951] bus: 00 index 2 mmio: [e0000000, f6ffffff] [ 0.166951] bus: 00 index 3 mmio: [f8000000, ffffffff] [ 0.166951] bus: 00 index 4 mmio: [1a0000000, fcffffffff] [ 0.166951] ACPI: bus type pci registered [ 0.166951] PCI: MCFG configuration 0: base f7000000 segment 0 buses 0 - 15 [ 0.166951] PCI: MCFG area at f7000000 reserved in E820 [ 0.166951] PCI: Using MMCONFIG at f7000000 - f7ffffff [ 0.166951] PCI: Using configuration type 1 for base access [ 0.166951] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.166951] mtrr: probably your BIOS does not setup all CPUs. [ 0.166951] mtrr: corrected configuration. [ 0.168038] bio: create slab at 0 [ 0.168846] ACPI: EC: Look up EC in DSDT [ 0.170528] ACPI: Executed 1 blocks of module-level executable AML code [ 0.176934] ACPI: BIOS _OSI(Linux) query ignored [ 0.198087] ACPI: Interpreter enabled [ 0.198091] ACPI: (supports S0 S1 S3 S4 S5) [ 0.198118] ACPI: Using IOAPIC for interrupt routing [ 0.340374] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.340653] ACPI: No dock devices found. [ 0.341660] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.341820] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.341823] pci 0000:00:04.0: PME# disabled [ 0.341858] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.341861] pci 0000:00:05.0: PME# disabled [ 0.341921] pci 0000:00:11.0: reg 10 io port: [0x7038-0x703f] [ 0.341928] pci 0000:00:11.0: reg 14 io port: [0x704c-0x704f] [ 0.341935] pci 0000:00:11.0: reg 18 io port: [0x7030-0x7037] [ 0.341941] pci 0000:00:11.0: reg 1c io port: [0x7048-0x704b] [ 0.341947] pci 0000:00:11.0: reg 20 io port: [0x7010-0x701f] [ 0.341954] pci 0000:00:11.0: reg 24 32bit mmio: [0xf2306000-0xf23063ff] [ 0.342012] pci 0000:00:12.0: reg 10 32bit mmio: [0xf2305000-0xf2305fff] [ 0.342077] pci 0000:00:12.2: reg 10 32bit mmio: [0xf2306500-0xf23065ff] [ 0.342123] pci 0000:00:12.2: supports D1 D2 [ 0.342125] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.342129] pci 0000:00:12.2: PME# disabled [ 0.342158] pci 0000:00:13.0: reg 10 32bit mmio: [0xf2304000-0xf2304fff] [ 0.342223] pci 0000:00:13.2: reg 10 32bit mmio: [0xf2306400-0xf23064ff] [ 0.342269] pci 0000:00:13.2: supports D1 D2 [ 0.342271] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.342275] pci 0000:00:13.2: PME# disabled [ 0.342363] pci 0000:00:14.2: reg 10 64bit mmio: [0xf2300000-0xf2303fff] [ 0.342401] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.342405] pci 0000:00:14.2: PME# disabled [ 0.342581] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.342585] pci 0000:01:05.0: reg 14 io port: [0x6000-0x60ff] [ 0.342589] pci 0000:01:05.0: reg 18 32bit mmio: [0xf2200000-0xf220ffff] [ 0.342596] pci 0000:01:05.0: reg 24 32bit mmio: [0xf2100000-0xf21fffff] [ 0.342607] pci 0000:01:05.0: supports D1 D2 [ 0.342626] pci 0000:01:05.1: reg 10 32bit mmio: [0xf2210000-0xf2213fff] [ 0.342645] pci 0000:01:05.1: supports D1 D2 [ 0.342688] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff] [ 0.342690] pci 0000:00:01.0: bridge 32bit mmio: [0xf2100000-0xf22fffff] [ 0.342694] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.342757] pci 0000:02:00.0: reg 10 64bit mmio: [0xf1100000-0xf110ffff] [ 0.342811] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.342815] pci 0000:02:00.0: PME# disabled [ 0.348111] pci 0000:00:04.0: bridge io port: [0x2000-0x5fff] [ 0.348116] pci 0000:00:04.0: bridge 32bit mmio: [0xf1100000-0xf20fffff] [ 0.348120] pci 0000:00:04.0: bridge 64bit mmio pref: [0xf0000000-0xf0ffffff] [ 0.348164] pci 0000:08:00.0: reg 10 64bit mmio: [0xf1000000-0xf100ffff] [ 0.348211] pci 0000:08:00.0: supports D1 [ 0.348213] pci 0000:08:00.0: PME# supported from D0 D1 D3hot [ 0.348217] pci 0000:08:00.0: PME# disabled [ 0.356098] pci 0000:00:05.0: bridge 32bit mmio: [0xf1000000-0xf10fffff] [ 0.356157] pci 0000:00:14.4: transparent bridge [ 0.356188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.356444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.356536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.356630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.356787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.366607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.366819] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.367030] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.367241] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.367429] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.367574] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.367721] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.367869] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.367985] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.367989] vgaarb: loaded [ 0.368061] PCI: Using ACPI for IRQ routing [ 0.368240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.368244] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.370270] Switching to clocksource tsc [ 0.370283] pnp: PnP ACPI init [ 0.370283] ACPI: bus type pnp registered [ 0.437722] pnp: PnP ACPI: found 10 devices [ 0.437726] ACPI: ACPI bus type pnp unregistered [ 0.437744] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.437747] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.437750] system 00:01: iomem range 0xf7000000-0xf7ffffff has been reserved [ 0.437759] system 00:08: ioport range 0x400-0x4cf has been reserved [ 0.437762] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.437764] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.437766] system 00:08: ioport range 0x550-0x550 has been reserved [ 0.437769] system 00:08: ioport range 0x680-0x6ff has been reserved [ 0.437771] system 00:08: ioport range 0x77a-0x77a has been reserved [ 0.437773] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.437775] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.437778] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 0.437780] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.437782] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.437785] system 00:08: ioport range 0xcd0-0xcdb has been reserved [ 0.437787] system 00:08: ioport range 0xfd60-0xfd63 has been reserved [ 0.437793] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.437795] system 00:09: iomem range 0xffe00000-0xffffffff has been reserved [ 0.442686] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.442690] pci 0000:00:01.0: IO window: 0x6000-0x6fff [ 0.442693] pci 0000:00:01.0: MEM window: 0xf2100000-0xf22fffff [ 0.442696] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.442700] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.442703] pci 0000:00:04.0: IO window: 0x2000-0x5fff [ 0.442705] pci 0000:00:04.0: MEM window: 0xf1100000-0xf20fffff [ 0.442708] pci 0000:00:04.0: PREFETCH window: 0x000000f0000000-0x000000f0ffffff [ 0.442712] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08 [ 0.442713] pci 0000:00:05.0: IO window: disabled [ 0.442716] pci 0000:00:05.0: MEM window: 0xf1000000-0xf10fffff [ 0.442718] pci 0000:00:05.0: PREFETCH window: disabled [ 0.442721] pci 0000:00:14.4: PCI bridge, secondary bus 0000:09 [ 0.442723] pci 0000:00:14.4: IO window: disabled [ 0.442731] pci 0000:00:14.4: MEM window: disabled [ 0.442734] pci 0000:00:14.4: PREFETCH window: disabled [ 0.442746] pci 0000:00:01.0: setting latency timer to 64 [ 0.442753] alloc irq_desc for 16 on node 0 [ 0.442755] alloc kstat_irqs on node 0 [ 0.442761] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.442764] pci 0000:00:04.0: setting latency timer to 64 [ 0.442769] alloc irq_desc for 17 on node 0 [ 0.442770] alloc kstat_irqs on node 0 [ 0.442773] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.442775] pci 0000:00:05.0: setting latency timer to 64 [ 0.442783] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.442785] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.442788] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff] [ 0.442790] pci_bus 0000:01: resource 1 mem: [0xf2100000-0xf22fffff] [ 0.442792] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.442794] pci_bus 0000:02: resource 0 io: [0x2000-0x5fff] [ 0.442796] pci_bus 0000:02: resource 1 mem: [0xf1100000-0xf20fffff] [ 0.442798] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf0ffffff] [ 0.442800] pci_bus 0000:08: resource 1 mem: [0xf1000000-0xf10fffff] [ 0.442802] pci_bus 0000:09: resource 3 io: [0x00-0xffff] [ 0.442804] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.442835] NET: Registered protocol family 2 [ 0.443057] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.444571] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.448208] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.448658] TCP: Hash tables configured (established 524288 bind 65536) [ 0.448661] TCP reno registered [ 0.448757] NET: Registered protocol family 1 [ 0.565662] pci 0000:01:05.0: Boot video device [ 0.565720] Unpacking initramfs... [ 0.789769] Freeing initrd memory: 10719k freed [ 0.794111] PCI-DMA: Disabling AGP. [ 0.794191] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.794192] PCI-DMA: using GART IOMMU. [ 0.794196] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.795325] Simple Boot Flag at 0x44 set to 0x1 [ 0.795618] audit: initializing netlink socket (disabled) [ 0.795627] type=2000 audit(1311469913.793:1): initialized [ 0.798701] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.799883] VFS: Disk quotas dquot_6.5.2 [ 0.799991] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.800069] msgmni has been set to 11458 [ 0.800310] alg: No test for stdrng (krng) [ 0.800397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.800401] io scheduler noop registered [ 0.800403] io scheduler anticipatory registered [ 0.800405] io scheduler deadline registered [ 0.800430] io scheduler cfq registered (default) [ 0.800610] alloc irq_desc for 24 on node 0 [ 0.800614] alloc kstat_irqs on node 0 [ 0.800623] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X [ 0.800628] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.800772] alloc irq_desc for 25 on node 0 [ 0.800774] alloc kstat_irqs on node 0 [ 0.800778] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X [ 0.800782] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.801946] Linux agpgart interface v0.103 [ 0.801979] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.802296] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.802343] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.817502] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.817509] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.817641] mice: PS/2 mouse device common for all mice [ 0.817677] rtc_cmos 00:04: RTC can wake from S4 [ 0.817711] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.817735] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 0.817744] cpuidle: using governor ladder [ 0.817746] cpuidle: using governor menu [ 0.817750] No iBFT detected. [ 0.818069] TCP cubic registered [ 0.818162] NET: Registered protocol family 10 [ 0.818861] Mobile IPv6 [ 0.818863] NET: Registered protocol family 17 [ 0.818933] PM: Resume from disk failed. [ 0.818942] registered taskstats version 1 [ 0.819274] rtc_cmos 00:04: setting system clock to 2011-07-24 01:11:54 UTC (1311469914) [ 0.819317] Initalizing network drop monitor service [ 0.819343] Freeing unused kernel memory: 592k freed [ 0.819528] Write protecting the kernel read-only data: 4236k [ 0.834898] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.840310] udev[81]: starting version 164 [ 0.959067] SCSI subsystem initialized [ 0.967457] usbcore: registered new interface driver usbfs [ 0.967485] usbcore: registered new interface driver hub [ 0.967508] usbcore: registered new device driver usb [ 0.972340] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.974747] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.974790] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 0.974793] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.974823] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.974840] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.974868] ehci_hcd 0000:00:12.2: debug port 1 [ 0.974894] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf2306500 [ 0.977963] ACPI: Invalid active0 threshold [ 0.981695] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.981704] ACPI: Thermal Zone [THRM] (70 C) [ 0.987130] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.987155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.987158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.987160] usb usb1: Product: EHCI Host Controller [ 0.987162] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd [ 0.987164] usb usb1: SerialNumber: 0000:00:12.2 [ 0.987285] usb usb1: configuration #1 chosen from 1 choice [ 0.987333] hub 1-0:1.0: USB hub found [ 0.987342] hub 1-0:1.0: 5 ports detected [ 0.987504] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.987539] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 0.987542] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.987552] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.987566] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.987587] ehci_hcd 0000:00:13.2: debug port 1 [ 0.987601] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf2306400 [ 0.987668] libata version 3.00 loaded. [ 0.988552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.991884] tg3.c:v3.102 (September 1, 2009) [ 0.991905] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.991913] tg3 0000:02:00.0: setting latency timer to 64 [ 0.997657] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.997687] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.997690] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.997693] usb usb2: Product: EHCI Host Controller [ 0.997694] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd [ 0.997696] usb usb2: SerialNumber: 0000:00:13.2 [ 0.997789] usb usb2: configuration #1 chosen from 1 choice [ 0.997815] hub 2-0:1.0: USB hub found [ 0.997823] hub 2-0:1.0: 5 ports detected [ 0.998531] alloc irq_desc for 18 on node 0 [ 0.998533] alloc kstat_irqs on node 0 [ 0.998541] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.998576] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 0.998580] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.998592] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.998622] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf2305000 [ 1.000745] tg3 mdio bus: probed [ 1.008658] eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address b8:70:f4:6c:6a:da [ 1.008662] eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01) [ 1.008665] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.008667] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.052116] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.052120] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.052123] usb usb3: Product: OHCI Host Controller [ 1.052124] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd [ 1.052126] usb usb3: SerialNumber: 0000:00:12.0 [ 1.052223] usb usb3: configuration #1 chosen from 1 choice [ 1.052256] hub 3-0:1.0: USB hub found [ 1.052270] hub 3-0:1.0: 5 ports detected [ 1.052394] ahci 0000:00:11.0: version 3.0 [ 1.052406] alloc irq_desc for 19 on node 0 [ 1.052408] alloc kstat_irqs on node 0 [ 1.052415] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.052481] alloc irq_desc for 26 on node 0 [ 1.052483] alloc kstat_irqs on node 0 [ 1.052493] ahci 0000:00:11.0: irq 26 for MSI/MSI-X [ 1.052552] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.052556] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.052733] scsi0 : ahci [ 1.052838] scsi1 : ahci [ 1.052946] ata1: SATA max UDMA/133 abar m1024@0xf2306000 port 0xf2306100 irq 26 [ 1.052949] ata2: SATA max UDMA/133 abar m1024@0xf2306000 port 0xf2306180 irq 26 [ 1.053268] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.053292] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 1.053295] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.053310] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 1.053333] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf2304000 [ 1.112100] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.112103] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.112106] usb usb4: Product: OHCI Host Controller [ 1.112107] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd [ 1.112109] usb usb4: SerialNumber: 0000:00:13.0 [ 1.112219] usb usb4: configuration #1 chosen from 1 choice [ 1.112245] hub 4-0:1.0: USB hub found [ 1.112260] hub 4-0:1.0: 5 ports detected [ 1.264105] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.399752] usb 1-3: New USB device found, idVendor=0951, idProduct=1625 [ 1.399756] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.399759] usb 1-3: Product: DT 101 II [ 1.399761] usb 1-3: Manufacturer: Kingston [ 1.399762] usb 1-3: SerialNumber: 001CC0EC2F41AA2196B314F7 [ 1.399862] usb 1-3: configuration #1 chosen from 1 choice [ 1.406408] Initializing USB Mass Storage driver... [ 1.406507] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.406575] usbcore: registered new interface driver usb-storage [ 1.406577] USB Mass Storage support registered. [ 1.406582] usb-storage: device found at 2 [ 1.406583] usb-storage: waiting for device to settle before scanning [ 1.512105] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.536077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.536104] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.539953] ata1.00: ATA-8: WDC WD5000BPVT-22HXZT1, 01.01A01, max UDMA/133 [ 1.539957] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.544055] ata1.00: configured for UDMA/133 [ 1.550891] ata2.00: ATAPI: PIONEER DVD-RW DVRTD10RS, 1.00, max UDMA/100 [ 1.560307] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 01.0 PQ: 0 ANSI: 5 [ 1.563746] ata2.00: configured for UDMA/100 [ 1.584060] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVRTD10RS 1.00 PQ: 0 ANSI: 5 [ 1.593529] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.593534] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.593736] sd 0:0:0:0: [sda] Write Protect is off [ 1.593739] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.593769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.593999] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.610571] Uniform CD-ROM driver Revision: 3.20 [ 1.610683] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.625629] sda1 sda2 sda3 [ 1.625897] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.630004] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.630041] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.694782] usb 2-1: New USB device found, idVendor=058f, idProduct=b002 [ 1.694786] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.694789] usb 2-1: Product: 1.3M HD WebCam [ 1.694790] usb 2-1: Manufacturer: AAB3D1DZJ [ 1.694889] usb 2-1: configuration #1 chosen from 1 choice [ 1.808130] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 2.026576] Uniform Multi-Platform E-IDE driver [ 2.027045] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 2.027060] Probing IDE interface ide0... [ 2.030042] ide0: no devices on the port [ 2.030094] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.030105] Probing IDE interface ide1... [ 2.033085] ide1: no devices on the port [ 2.033120] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.131324] NTFS driver 2.1.29 [Flags: R/W MODULE]. [ 2.176465] NTFS volume version 3.1. [ 2.201685] usb 2-2: New USB device found, idVendor=0bda, idProduct=0138 [ 2.201689] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.201692] usb 2-2: Product: USB2.0-CRW [ 2.201693] usb 2-2: Manufacturer: Generic [ 2.201695] usb 2-2: SerialNumber: 20090516388200000 [ 2.201798] usb 2-2: configuration #1 chosen from 1 choice [ 2.207576] scsi3 : SCSI emulation for USB Mass Storage devices [ 2.207861] usb-storage: device found at 3 [ 2.207863] usb-storage: waiting for device to settle before scanning [ 2.227043] NTFS volume version 3.1. [ 2.298630] NTFS volume version 3.1. [ 6.404286] usb-storage: device scan complete [ 6.404887] scsi 2:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2 [ 6.405356] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.407771] sd 2:0:0:0: [sdb] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 6.408336] sd 2:0:0:0: [sdb] Write Protect is off [ 6.408341] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 6.408343] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.410883] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.410925] sdb: sdb1 [ 6.415133] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.415174] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 7.125125] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.208410] usb-storage: device scan complete [ 7.210948] scsi 3:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 7.211533] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 7.215165] aufs: module is from the staging directory, the quality is unknown, you have been warned. [ 7.217554] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 7.219795] aufs 2-standalone.tree-32-20100125 [ 7.234207] loop: module loaded [ 7.302068] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 12.449510] udev[1346]: starting version 164 [ 12.519511] ACPI: processor limited to max C-state 1 [ 12.519559] processor LNXCPU:00: registered as cooling_device0 [ 12.519597] processor LNXCPU:01: registered as cooling_device1 [ 12.522733] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 12.522743] ACPI: Power Button [PWRB] [ 12.522804] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 12.522808] ACPI: Sleep Button [SLPB] [ 12.522895] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 [ 12.523013] ACPI: Lid Switch [LID] [ 12.523066] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 12.523069] ACPI: Power Button [PWRF] [ 12.541658] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 12.596132] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 [ 12.596137] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 12.600279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.611966] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 12.630497] ACPI: WMI: Mapper loaded [ 12.649716] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 12.710850] acpi device:01: registered as cooling_device2 [ 12.710971] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7 [ 12.711015] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.320213] ACPI: Battery Slot [BAT1] (battery present) [ 13.328119] EDAC MC: Ver: 2.1.0 Mar 7 2011 [ 13.328182] ACPI: AC Adapter [ACAD] (on-line) [ 13.361490] cfg80211: Using static regulatory domain info [ 13.361494] cfg80211: Regulatory domain: US [ 13.361496] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.361498] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 13.361501] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 13.361503] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 13.361505] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 13.361507] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 13.361509] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 13.363544] acer-wmi: Acer Laptop ACPI-WMI Extras [ 13.373317] acer-wmi: Unable to detect available WMID devices [ 13.391002] EDAC amd64_edac: Ver: 3.2.0 Mar 7 2011 [ 13.391630] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 13.391641] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 13.391643] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 13.391644] (Note that use of the override may cause unknown side effects.) [ 13.391664] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 13.407560] Linux video capture interface: v2.00 [ 13.452037] [drm] Initialized drm 1.1.0 20060810 [ 13.455562] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002) [ 13.461050] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input8 [ 13.461095] usbcore: registered new interface driver uvcvideo [ 13.461098] USB Video Class driver (v0.1.0) [ 13.536052] [drm] radeon kernel modesetting enabled. [ 13.536156] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 13.536161] radeon 0000:01:05.0: setting latency timer to 64 [ 13.538464] [drm] radeon: Initializing kernel modesetting. [ 13.538984] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.539077] HDA Intel 0000:00:14.2: setting latency timer to 64 [ 13.539197] [drm] register mmio base: 0xF2200000 [ 13.539199] [drm] register mmio size: 65536 [ 13.544299] ATOM BIOS: Acer_JE51DN [ 13.544314] [drm] Clocks initialized ! [ 13.544462] [drm] Detected VRAM RAM=256M, BAR=256M [ 13.544465] [drm] RAM width 32bits DDR [ 13.544601] [TTM] Zone kernel: Available graphics memory: 2933784 kiB. [ 13.544604] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 13.544622] [drm] radeon: 256M of VRAM memory ready [ 13.544624] [drm] radeon: 512M of GTT memory ready. [ 13.544660] [drm] radeon: irq initialized. [ 13.544662] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 13.545452] [drm] Loading RS780 Microcode [ 13.545455] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin [ 13.549785] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin" [ 13.549830] [drm:r600_startup] *ERROR* Failed to load firmware! [ 13.549866] radeon 0000:01:05.0: disabling GPU acceleration [ 13.549921] radeon 0000:01:05.0: ffff88018c3ec800 unpin not necessary [ 13.549923] radeon 0000:01:05.0: ffff88018c3ec800 unpin not necessary [ 13.549940] [drm] Enabling audio support [ 13.550082] [drm] Radeon Display Connectors [ 13.550084] [drm] Connector 0: [ 13.550085] [drm] VGA [ 13.550087] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 13.550088] [drm] Encoders: [ 13.550090] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 13.550091] [drm] Connector 1: [ 13.550092] [drm] LVDS [ 13.550094] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 13.550096] [drm] Encoders: [ 13.550097] [drm] LCD1: INTERNAL_KLDSCP_LVTMA [ 13.550098] [drm] Connector 2: [ 13.550099] [drm] HDMI-A [ 13.550100] [drm] HPD1 [ 13.550102] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 13.550104] [drm] Encoders: [ 13.550105] [drm] DFP1: INTERNAL_UNIPHY [ 13.644729] cfg80211: Calling CRDA for country: US [ 13.671385] hda_codec: ALC272: BIOS auto-probing. [ 13.672593] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9 [ 13.716407] [drm] fb mappable at 0xE0040000 [ 13.716410] [drm] vram apper at 0xE0000000 [ 13.716411] [drm] size 4325376 [ 13.716413] [drm] fb depth is 24 [ 13.716414] [drm] pitch is 5632 [ 13.716436] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 13.716445] ath9k 0000:08:00.0: setting latency timer to 64 [ 13.803690] ath: EEPROM regdomain: 0x65 [ 13.803692] ath: EEPROM indicates we should expect a direct regpair map [ 13.803695] ath: Country alpha2 being used: 00 [ 13.803697] ath: Regpair used: 0x65 [ 13.809319] elantech.c: assuming hardware version 2, firmware version 4.2.19 [ 13.823510] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 13.824149] Registered led device: ath9k-phy0::radio [ 13.824163] Registered led device: ath9k-phy0::assoc [ 13.824175] Registered led device: ath9k-phy0::tx [ 13.824186] Registered led device: ath9k-phy0::rx [ 13.824196] phy0: Atheros AR9287 MAC/BB Rev:2 AR5133 RF Rev:ff: mem=0xffffc90002800000, irq=17 [ 13.879818] elantech.c: Synaptics capabilities query result 0x68, 0x18, 0x0c. [ 14.188587] elantech.c: retrying ps2 command 0xe6 (2). [ 14.703813] elantech.c: retrying ps2 command 0xf8 (2). [ 14.751283] Console: switching to colour frame buffer device 170x48 [ 14.762483] fb0: radeondrmfb frame buffer device [ 14.762485] registered panic notifier [ 14.762499] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 [ 14.762608] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 14.762699] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 15.404553] elantech.c: retrying ps2 command 0xf8 (1). [ 15.450826] fuse init (API version 7.13) [ 15.977659] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10 [ 16.313324] powernow-k8: Found 1 AMD Athlon(tm) II P340 Dual-Core Processor processors (2 cpu cores) (version 2.20.00) [ 16.313379] powernow-k8: 0 : pstate 0 (2200 MHz) [ 16.313381] powernow-k8: 1 : pstate 1 (1600 MHz) [ 16.313383] powernow-k8: 2 : pstate 2 (800 MHz) [ 16.456236] Bluetooth: Core ver 2.15 [ 16.456539] NET: Registered protocol family 31 [ 16.456541] Bluetooth: HCI device and connection manager initialized [ 16.456546] Bluetooth: HCI socket layer initialized [ 16.513206] Bluetooth: L2CAP ver 2.14 [ 16.513209] Bluetooth: L2CAP socket layer initialized [ 16.650669] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.650676] Bluetooth: BNEP filters: protocol multicast [ 16.686965] Bridge firewalling registered [ 16.757020] Bluetooth: SCO (Voice Link) ver 0.6 [ 16.757026] Bluetooth: SCO socket layer initialized [ 16.911014] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11 [ 16.931897] alloc irq_desc for 27 on node 0 [ 16.931905] alloc kstat_irqs on node 0 [ 16.931937] tg3 0000:02:00.0: irq 27 for MSI/MSI-X [ 16.960296] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.977543] tg3: eth0: Link is down. [ 17.013757] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.117410] lp: driver loaded but no devices found [ 17.135923] ppdev: user-space parallel port driver [ 18.981038] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 18.981042] tg3: eth0: Flow control is on for TX and on for RX. [ 18.982187] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.207229] CPU0 attaching NULL sched-domain. [ 22.207235] CPU1 attaching NULL sched-domain. [ 22.224223] CPU0 attaching sched-domain: [ 22.224233] domain 0: span 0-1 level MC [ 22.224240] groups: 0 1 [ 22.224254] CPU1 attaching sched-domain: [ 22.224259] domain 0: span 0-1 level MC [ 22.224264] groups: 1 0 [ 29.848011] eth0: no IPv6 routers present [ 3082.357121] CPU0 attaching NULL sched-domain. [ 3082.357134] CPU1 attaching NULL sched-domain. [ 3082.376791] CPU0 attaching sched-domain: [ 3082.376802] domain 0: span 0-1 level MC [ 3082.376808] groups: 0 1 [ 3082.376823] CPU1 attaching sched-domain: [ 3082.376828] domain 0: span 0-1 level MC [ 3082.376833] groups: 1 0 [ 3082.626439] tg3 0000:02:00.0: PME# enabled [ 3082.929174] PM: Syncing filesystems ... done. [ 3082.929186] PM: Preparing system for mem sleep [ 3083.140405] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 3083.141078] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 3083.141160] PM: Entering mem sleep [ 3083.141176] Suspending console(s) (use no_console_suspend to debug) [ 3083.188197] tg3: eth0: Link is down. [ 3083.196132] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3083.196446] sd 0:0:0:0: [sda] Stopping disk [ 3084.270342] ath9k 0000:08:00.0: PCI INT A disabled [ 3084.388107] HDA Intel 0000:01:05.1: PCI INT B disabled [ 3084.388124] ACPI handle has no context! [ 3084.784820] radeon 0000:01:05.0: PCI INT A disabled [ 3084.905056] HDA Intel 0000:00:14.2: PCI INT A disabled [ 3084.920099] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 3084.920108] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 3084.920114] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 3084.920120] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 3085.016187] ACPI: Preparing to enter system sleep state S3 [ 3085.056811] Disabling non-boot CPUs ... [ 3085.056827] CPU0 attaching NULL sched-domain. [ 3085.056830] CPU1 attaching NULL sched-domain. [ 3085.104606] CPU0 attaching NULL sched-domain. [ 3085.106817] CPU 1 is now offline [ 3085.106820] SMP alternatives: switching to UP code [ 3085.111143] Back to C! [ 3085.111143] PCI-DMA: Resuming GART IOMMU [ 3085.111143] PCI-DMA: Restoring GART aperture settings [ 3085.111143] Enabling non-boot CPUs ... [ 3085.111143] SMP alternatives: switching to SMP code [ 3085.115213] Booting processor 1 APIC 0x1 ip 0x6000 [ 3085.111143] Initializing CPU#1 [ 3085.111143] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 3085.111143] CPU: L2 Cache: 512K (64 bytes/line) [ 3085.111143] CPU 1/0x1 -> Node 0 [ 3085.111143] CPU: Physical Processor ID: 0 [ 3085.111143] CPU: Processor Core ID: 1 [ 3085.204030] CPU1: AMD Athlon(tm) II P340 Dual-Core Processor stepping 03 [ 3085.204071] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 3085.224142] Switch to broadcast mode on CPU1 [ 3085.224144] CPU0 attaching NULL sched-domain. [ 3085.252110] CPU0 attaching sched-domain: [ 3085.252114] domain 0: span 0-1 level MC [ 3085.252116] groups: 0 1 [ 3085.252121] CPU1 attaching sched-domain: [ 3085.252123] domain 0: span 0-1 level MC [ 3085.252124] groups: 1 0 [ 3085.252454] CPU1 is up [ 3085.252570] ACPI: Waking up from system sleep state S3 [ 3085.253046] pcieport 0000:00:04.0: restoring config space at offset 0x7 (was 0x20005121, writing 0x5121) [ 3085.253051] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 3085.253055] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 3085.253076] pcieport 0000:00:05.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1) [ 3085.253080] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 3085.253084] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 3085.253120] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300407) [ 3085.268123] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00012) [ 3085.284152] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00012) [ 3085.284283] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) [ 3085.284301] HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 3085.284305] HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003) [ 3085.284425] ath9k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) [ 3086.324239] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3086.348098] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3086.348110] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3086.372125] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3086.372139] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3086.372175] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3086.372178] radeon 0000:01:05.0: setting latency timer to 64 [ 3086.372992] [drm] Clocks initialized ! [ 3086.373031] [drm] Loading RS780 Microcode [ 3086.373034] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin [ 3086.808126] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3086.835585] ata2.00: configured for UDMA/100 [ 3087.648131] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3087.666282] ata1.00: configured for UDMA/133 [ 3146.372115] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin" [ 3146.372118] [drm:r600_startup] *ERROR* Failed to load firmware! [ 3146.372120] [drm:r600_resume] *ERROR* r600 startup failed on resume [ 3147.388089] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [ 3147.388094] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E90E (len 492, WS 0, PS 4) @ 0xE94F [ 3148.404089] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [ 3148.404093] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E90E (len 492, WS 0, PS 4) @ 0xE94F [ 3148.416121] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3148.416126] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 3148.416154] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3148.628327] sd 0:0:0:0: [sda] Starting disk [ 3151.192095] usb 2-1: reset high speed USB device using ehci_hcd and address 2 [ 3151.476094] usb 2-2: reset high speed USB device using ehci_hcd and address 3 [ 3151.621653] PM: Finishing wakeup. [ 3151.621655] Restarting tasks ... done. [ 3151.933641] tg3 0000:02:00.0: PME# disabled [ 3151.933694] tg3 0000:02:00.0: irq 27 for MSI/MSI-X [ 3151.939269] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3151.977389] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3152.029657] CPU0 attaching NULL sched-domain. [ 3152.029670] CPU1 attaching NULL sched-domain. [ 3152.052316] CPU0 attaching sched-domain: [ 3152.052326] domain 0: span 0-1 level MC [ 3152.052333] groups: 0 1 [ 3152.052348] CPU1 attaching sched-domain: [ 3152.052353] domain 0: span 0-1 level MC [ 3152.052358] groups: 1 0 [ 3152.180180] elantech.c: retrying ps2 command 0xe6 (2). [ 3152.381243] tg3: eth0: Link is down. [ 3152.693472] elantech.c: retrying ps2 command 0xf8 (2). [ 3153.396161] elantech.c: retrying ps2 command 0xf8 (1). [ 3154.381130] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 3154.381138] tg3: eth0: Flow control is on for TX and on for RX. [ 3154.383992] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3164.648181] eth0: no IPv6 routers present [ 3183.577936] CPU0 attaching NULL sched-domain. [ 3183.577950] CPU1 attaching NULL sched-domain. [ 3183.600310] CPU0 attaching sched-domain: [ 3183.600320] domain 0: span 0-1 level MC [ 3183.600327] groups: 0 1 [ 3183.600342] CPU1 attaching sched-domain: [ 3183.600347] domain 0: span 0-1 level MC [ 3183.600352] groups: 1 0 [ 3183.846512] tg3 0000:02:00.0: PME# enabled [ 3184.136778] PM: Syncing filesystems ... done. [ 3184.136790] PM: Preparing system for mem sleep [ 3184.348884] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 3184.349546] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 3184.349579] PM: Entering mem sleep [ 3184.349595] Suspending console(s) (use no_console_suspend to debug) [ 3184.380152] tg3: eth0: Link is down. [ 3184.420099] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3184.420346] sd 0:0:0:0: [sda] Stopping disk [ 3185.491145] ath9k 0000:08:00.0: PCI INT A disabled [ 3185.504173] HDA Intel 0000:01:05.1: PCI INT B disabled [ 3185.504189] ACPI handle has no context! [ 3185.901756] radeon 0000:01:05.0: PCI INT A disabled [ 3186.020481] HDA Intel 0000:00:14.2: PCI INT A disabled [ 3186.036099] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 3186.036108] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 3186.036114] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 3186.036120] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 3186.132218] ACPI: Preparing to enter system sleep state S3 [ 3186.172303] Disabling non-boot CPUs ... [ 3186.172322] CPU0 attaching NULL sched-domain. [ 3186.172325] CPU1 attaching NULL sched-domain. [ 3186.220105] CPU0 attaching NULL sched-domain. [ 3186.324073] CPU 1 is now offline [ 3186.324076] SMP alternatives: switching to UP code [ 3186.328397] Back to C! [ 3186.328397] PCI-DMA: Resuming GART IOMMU [ 3186.328397] PCI-DMA: Restoring GART aperture settings [ 3186.328397] Enabling non-boot CPUs ... [ 3186.328397] SMP alternatives: switching to SMP code [ 3186.332465] Booting processor 1 APIC 0x1 ip 0x6000 [ 3186.328380] Initializing CPU#1 [ 3186.328380] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 3186.328380] CPU: L2 Cache: 512K (64 bytes/line) [ 3186.328380] CPU 1/0x1 -> Node 0 [ 3186.328380] CPU: Physical Processor ID: 0 [ 3186.328380] CPU: Processor Core ID: 1 [ 3186.420087] CPU1: AMD Athlon(tm) II P340 Dual-Core Processor stepping 03 [ 3186.420128] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 3186.440200] CPU0 attaching NULL sched-domain. [ 3186.440202] Switch to broadcast mode on CPU1 [ 3186.468110] CPU0 attaching sched-domain: [ 3186.468114] domain 0: span 0-1 level MC [ 3186.468116] groups: 0 1 [ 3186.468121] CPU1 attaching sched-domain: [ 3186.468123] domain 0: span 0-1 level MC [ 3186.468124] groups: 1 0 [ 3186.468454] CPU1 is up [ 3186.468568] ACPI: Waking up from system sleep state S3 [ 3186.469045] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 3186.469050] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 3186.469073] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 3186.469077] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 3186.469113] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300407) [ 3186.484123] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00012) [ 3186.500153] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00012) [ 3186.500285] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) [ 3186.500303] HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 3186.500307] HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003) [ 3186.500426] ath9k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) [ 3187.540239] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3187.564098] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3187.564111] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3187.588125] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3187.588139] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3187.588175] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3187.588178] radeon 0000:01:05.0: setting latency timer to 64 [ 3187.588992] [drm] Clocks initialized ! [ 3187.589030] [drm] Loading RS780 Microcode [ 3187.589033] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin [ 3188.024129] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3188.051645] ata2.00: configured for UDMA/100 [ 3188.808092] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3188.823522] ata1.00: configured for UDMA/133 [ 3247.588158] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin" [ 3247.588160] [drm:r600_startup] *ERROR* Failed to load firmware! [ 3247.588162] [drm:r600_resume] *ERROR* r600 startup failed on resume [ 3248.604089] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [ 3248.604093] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E90E (len 492, WS 0, PS 4) @ 0xE94F [ 3249.620089] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [ 3249.620093] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E90E (len 492, WS 0, PS 4) @ 0xE94F [ 3249.632121] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3249.632126] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 3249.632153] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3249.844267] sd 0:0:0:0: [sda] Starting disk [ 3252.468095] usb 2-1: reset high speed USB device using ehci_hcd and address 2 [ 3252.752094] usb 2-2: reset high speed USB device using ehci_hcd and address 3 [ 3252.897714] PM: Finishing wakeup. [ 3252.897716] Restarting tasks ... done. [ 3253.205222] tg3 0000:02:00.0: PME# disabled [ 3253.205278] tg3 0000:02:00.0: irq 27 for MSI/MSI-X [ 3253.226655] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3253.265395] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3253.362500] CPU0 attaching NULL sched-domain. [ 3253.362507] CPU1 attaching NULL sched-domain. [ 3253.384832] CPU0 attaching sched-domain: [ 3253.384842] domain 0: span 0-1 level MC [ 3253.384848] groups: 0 1 [ 3253.384863] CPU1 attaching sched-domain: [ 3253.384868] domain 0: span 0-1 level MC [ 3253.384873] groups: 1 0 [ 3253.441215] tg3: eth0: Link is down. [ 3253.452189] elantech.c: retrying ps2 command 0xe6 (2). [ 3253.968311] elantech.c: retrying ps2 command 0xf8 (2). [ 3254.672176] elantech.c: retrying ps2 command 0xf8 (1). [ 3255.441131] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 3255.441139] tg3: eth0: Flow control is on for TX and on for RX. [ 3255.443993] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3265.764133] eth0: no IPv6 routers present [ 3631.145534] CPU0 attaching NULL sched-domain. [ 3631.145547] CPU1 attaching NULL sched-domain. [ 3631.168312] CPU0 attaching sched-domain: [ 3631.168322] domain 0: span 0-1 level MC [ 3631.168329] groups: 0 1 [ 3631.168343] CPU1 attaching sched-domain: [ 3631.168349] domain 0: span 0-1 level MC [ 3631.168354] groups: 1 0 [ 3631.410520] tg3 0000:02:00.0: PME# enabled [ 3631.444087] tg3: eth0: Link is down. [ 3631.705130] PM: Syncing filesystems ... done. [ 3631.705141] PM: Preparing system for mem sleep [ 3631.916873] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 3631.917451] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 3631.917483] PM: Entering mem sleep [ 3631.917499] Suspending console(s) (use no_console_suspend to debug) [ 3631.988100] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3631.988345] sd 0:0:0:0: [sda] Stopping disk [ 3633.057929] ath9k 0000:08:00.0: PCI INT A disabled [ 3633.072187] HDA Intel 0000:01:05.1: PCI INT B disabled [ 3633.072203] ACPI handle has no context! [ 3633.469552] radeon 0000:01:05.0: PCI INT A disabled [ 3633.588470] HDA Intel 0000:00:14.2: PCI INT A disabled [ 3633.604099] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 3633.604108] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 3633.604114] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 3633.604120] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 3633.700220] ACPI: Preparing to enter system sleep state S3 [ 3633.740304] Disabling non-boot CPUs ... [ 3633.740324] CPU0 attaching NULL sched-domain. [ 3633.740326] CPU1 attaching NULL sched-domain. [ 3633.788106] CPU0 attaching NULL sched-domain. [ 3633.892074] CPU 1 is now offline [ 3633.892077] SMP alternatives: switching to UP code [ 3633.896373] Back to C! [ 3633.896373] PCI-DMA: Resuming GART IOMMU [ 3633.896373] PCI-DMA: Restoring GART aperture settings [ 3633.896373] Enabling non-boot CPUs ... [ 3633.896373] SMP alternatives: switching to SMP code [ 3633.900443] Booting processor 1 APIC 0x1 ip 0x6000 [ 3633.896356] Initializing CPU#1 [ 3633.896356] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 3633.896356] CPU: L2 Cache: 512K (64 bytes/line) [ 3633.896356] CPU 1/0x1 -> Node 0 [ 3633.896356] CPU: Physical Processor ID: 0 [ 3633.896356] CPU: Processor Core ID: 1 [ 3633.988066] CPU1: AMD Athlon(tm) II P340 Dual-Core Processor stepping 03 [ 3633.988107] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 3633.896356] Switch to broadcast mode on CPU1 [ 3634.008209] CPU0 attaching NULL sched-domain. [ 3634.036110] CPU0 attaching sched-domain: [ 3634.036113] domain 0: span 0-1 level MC [ 3634.036115] groups: 0 1 [ 3634.036121] CPU1 attaching sched-domain: [ 3634.036122] domain 0: span 0-1 level MC [ 3634.036124] groups: 1 0 [ 3634.036454] CPU1 is up [ 3634.036570] ACPI: Waking up from system sleep state S3 [ 3634.037054] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 3634.037058] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 3634.037082] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 3634.037085] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 3634.037121] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300407) [ 3634.052122] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00012) [ 3634.068152] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00012) [ 3634.068284] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) [ 3634.068302] HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) [ 3634.068305] HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003) [ 3634.068425] ath9k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) [ 3635.108239] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3635.132098] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3635.132111] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3635.156124] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3635.156138] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3635.156174] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3635.156177] radeon 0000:01:05.0: setting latency timer to 64 [ 3635.156991] [drm] Clocks initialized ! [ 3635.157029] [drm] Loading RS780 Microcode [ 3635.157032] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin [ 3635.592126] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3635.619645] ata2.00: configured for UDMA/100 [ 3636.488136] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3636.505690] ata1.00: configured for UDMA/133 [ 3695.156155] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin" [ 3695.156158] [drm:r600_startup] *ERROR* Failed to load firmware! [ 3695.156159] [drm:r600_resume] *ERROR* r600 startup failed on resume [ 3696.172089] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [ 3696.172093] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E90E (len 492, WS 0, PS 4) @ 0xE94F [ 3697.188088] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [ 3697.188092] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E90E (len 492, WS 0, PS 4) @ 0xE94F [ 3697.200120] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3697.200125] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 3697.200152] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3697.412269] sd 0:0:0:0: [sda] Starting disk [ 3701.472097] usb 2-1: reset high speed USB device using ehci_hcd and address 2 [ 3701.756104] usb 2-2: reset high speed USB device using ehci_hcd and address 3 [ 3701.901713] PM: Finishing wakeup. [ 3701.901715] Restarting tasks ... done. [ 3702.149725] tg3 0000:02:00.0: PME# disabled [ 3702.149780] tg3 0000:02:00.0: irq 27 for MSI/MSI-X [ 3702.162638] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3702.192083] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3702.254422] CPU0 attaching NULL sched-domain. [ 3702.254430] CPU1 attaching NULL sched-domain. [ 3702.276615] CPU0 attaching sched-domain: [ 3702.276625] domain 0: span 0-1 level MC [ 3702.276631] groups: 0 1 [ 3702.276646] CPU1 attaching sched-domain: [ 3702.276651] domain 0: span 0-1 level MC [ 3702.276656] groups: 1 0 [ 3702.469223] tg3: eth0: Link is down. [ 3702.756178] elantech.c: retrying ps2 command 0xe6 (2). [ 3703.270181] elantech.c: retrying ps2 command 0xf8 (2). [ 3703.972181] elantech.c: retrying ps2 command 0xf8 (1). [ 3704.469141] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 3704.469148] tg3: eth0: Flow control is on for TX and on for RX. [ 3704.472036] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3714.988177] eth0: no IPv6 routers present [ 3718.536759] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input12