Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
#0 Wed Feb 23 16:08:54 UTC 2011 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) II P340 Dual-Core Processor (2194.51-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f63  Family = 10  Model = 6  Stepping = 3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x8377f<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,Prefetch,OSVW,IBS,SKINIT,WDT,<b19>>
  TSC: P-state invariant
real memory  = 3755208704 (3581 MB)
avail memory = 3669434368 (3499 MB)
ACPI APIC Table: <ACRSYS ACRPRDCT>
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x6000-0x60ff mem 0xe0000000-0xefffffff,0xf2200000-0xf220ffff,0xf2100000-0xf21fffff irq 18 at device 5.0 on pci1
pci1: <multimedia, HDA> at device 5.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM57780 A1, ASIC rev. 0x57780001> mem 0xf1100000-0xf110ffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: b8:70:f4:6c:6a:da
bge0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci8: <ACPI PCI bus> on pcib3
pci8: <network> at device 0.0 (no driver attached)
atapci0: <ATI IXP700/800 SATA300 controller> port 0x7038-0x703f,0x704c-0x704f,0x7030-0x7037,0x7048-0x704b,0x7010-0x701f mem 0xf2306000-0xf23063ff irq 19 at device 17.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 2 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xf2305000-0xf2305fff irq 18 at device 18.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf2306500-0xf23065ff irq 17 at device 18.2 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xf2304000-0xf2304fff irq 18 at device 19.0 on pci0
ohci1: [ITHREAD]
usbus2: <OHCI (generic) USB controller> on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf2306400-0xf23064ff irq 17 at device 19.2 on pci0
ehci1: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci9: <ACPI PCI bus> on pcib4
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> flags 0x100 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
RTC BIOS diagnostic error 80<clock_battery>
Timecounter "TSC" frequency 2194514384 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ad4: 476940MB <WDC WD5000BPVT-22HXZT1 01.01A01> at ata2-master UDMA100 SATA 3Gb/s
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
acpi_ec0: wait timed out (response), forcing polled mode
acd0: DVDR <PIONEER DVD-RW DVRTD10RS/1.00> at ata3-master UDMA100 SATA 1.5Gb/s
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata3:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata3:0:0:0): CAM status: SCSI Status Error
(probe0:ata3:0:0:0): SCSI status: Check Condition
(probe0:ata3:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
cd0 at ata3 bus 0 scbus1 target 0 lun 0
cd0: <PIONEER DVD-RW DVRTD10RS 1.00> Removable CD-ROM SCSI-0 device 
cd0: 100.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Root mount waiting for: usbus3 usbus1
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3 usbus1
ugen1.2: <Corsair> at usbus1
umass0: <Corsair Voyager, class 0/0, rev 2.00/11.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0000
ugen3.2: <AAB3D1DZJ> at usbus3
Root mount waiting for: usbus3 usbus1
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Corsair Voyager 1100> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 3824MB (7831552 512 byte sectors: 255H 63S/T 487C)
ugen3.3: <Generic> at usbus3
umass1: <Bulk-In, Bulk-Out, Interface> on usbus3
umass1:  SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus3
umass1:3:1:-1: Attached to scbus3
Trying to mount root from ufs:/dev/ufsid/4cc08aab6455cf88
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da1 at umass-sim1 bus 1 scbus3 target 0 lun 0
da1: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device 
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
pid 327 (hald-probe-volume), uid 0: exited on signal 11 (core dumped)
pid 329 (hald-probe-volume), uid 0: exited on signal 11 (core dumped)
pid 335 (hald-probe-volume), uid 0: exited on signal 11 (core dumped)
pid 337 (hald-probe-volume), uid 0: exited on signal 11 (core dumped)
pid 339 (hald-probe-volume), uid 0: exited on signal 11 (core dumped)
bge0: link state changed to UP
hdac0: <ATI SB600 High Definition Audio Controller> mem 0xf2300000-0xf2303fff irq 16 at device 20.2 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
hdac0: HDA Codec #0: Realtek ALC272
hdac1: <ATI (Unknown) High Definition Audio Controller> mem 0xf2210000-0xf2213fff irq 19 at device 5.1 on pci1
hdac1: HDA Driver Revision: 20100226_0142
hdac1: [ITHREAD]
hdac1: HDA Codec #0: ATI RS690/780 HDMI
pcm0: <HDA Realtek ALC272 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC272 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA ATI RS690/780 HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac1
pid 748 (xterm) is using legacy pty devices - not logging anymore
bge0: link state changed to DOWN
bge0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP